In the first part of this blog series, we saw some tips on finding the solvers that would be best suited to help you in your challenges and studies for stormwater systems. This blog will continue to explore this topic but will focus on sewage and combined systems.
Even though some variation is expected to be observed in the wastewater's flow and load, sudden changes in this pattern can impact the efficiency of the treatment processes.
For example, inflow and infiltration (I&I) high peaks during wet weather periods could exceed the capacity of the collection system or the treatment plant. This results in untreated wastewater in the environment. In this instance, RTK for Rainfall Derived Infiltration and Inflow is important to calibrate the sanitary system hydraulic model. OpenFlows SewerGEMS can help your team to assess this sort of problem and develop solutions.
OpenFlows SewerGEMS enables you and your team to accelerate your projects with constraint-based design routines and advanced scenario management. The intuitive graphical user interface (GUI) combined with the easy-to-build and easy-to-maintain tools to keep your hydraulic model accurate and up-to-date allows you to save time and effort for critical decision-making.
Beyond these advantages of the software, OpenFlows SewerGEMS also integrates seamlessly with the most popular CAD and GIS platforms (MicroStation, ArcGIS Pro, ArcMap, and AutoCAD). You choose whether you want to run OpenFlows SewerGEMS as a standalone platform or run it within the other platforms. Running OpenFlows SewerGEMS as a standalone platform eliminates the need for an additional subscription to another software. If you choose to integrate OpenFlows SewerGEMS into one of the compatible platforms, you can improve the design, management, publishing, and sharing of 2D and 3D drawings, BIM data, geographic maps, and models.
Wastewater, stormwater, and combined collection systems rely on complex pumping systems and gravity pipes that are partially full or dry. That complexity is reflected in the hydraulic conditions; therefore, calculating the hydraulic behavior is difficult without the right tools.
This difficulty is exactly why OpenFlows SewerGEMS offers a huge advantage to the user! OpenFlows SewerGEMS has four solvers: GVF-Rational, GVF-Convex, Implicit Dynamic, and Explicit Dynamic (SWMM). Each one was designed to help you with different conditions and challenges.
It empowers users to find and choose the best solution for each scenario and situation! Different solvers will help you adapt to every sanitary network and hydraulic behavior without switching between other software and converting files.
If you are scratching your head trying to figure out which solvers will give the answers you're looking for, you should ask yourself these questions about the network you are working on:
To design for sanitary systems operation (combined and sewer), the solver options would be either the GVF-Convex or the dynamic solvers (Explicit and Implicit). I wouldn't recommend the GVF-Rational for a combined system. Although you could use the Modified Rational method with multiple catchments using differing Times of Concentration and entering fixed inflows at nodes to represent sanitary loads, only one critical storm duration is entered.
Generally speaking, it is recommended to use the GVF convex solver when working with sanitary networks without significant wet weather flow and designed not overflow and systems consisting of primarily force mains or pressure sewers. The Implicit and Explicit solver should be used if you are working with combined systems to study LID best practices or to control overflows in systems with combined inflows or excessive I&I.
Flood wave propagation in overland, open channel, complex and problematic systems with cross-connections, loops, manhole overflows, surcharge, ponding, or where catchment rainfall-runoff calculations are required can be described as unsteady non-uniform flow.
For that type of hydraulic behavior, dynamic solvers are recommended. These solvers use the one-dimensional Saint Venant equations for flows estimation. Sometimes called the Dynamic Wave equations, these equations are theoretically more accurate and consist of a set of two nonlinear partial differential equations: the continuity and momentum equations.
These equations must be solved simultaneously. They cannot be solved analytically. Due to their nonlinear nature, these equations are difficult to solve numerically, especially around transitions to pressure, flow, pumps, and control structures.
These Dynamic Solvers work best in primarily gravity flow systems, with pumping limited to simple force mains without complex pressure hydraulics. There are some differences between the dynamic solvers. For instance, each engine handles the inflow hydrographs differently: the implicit solver interpolates flows between the final flow in the hydrograph and the end time. While the explicit solver assumes that all flows after the final inflow point are zero.
Also, for the explicit solver, there is an initial elevation attribute for manholes. This allows the calculation to simulate a filling process if the initial elevation is lower than the downstream start elevation. However, in the Implicit solver, the manhole initial elevation is not considered, so the initial manhole elevation is assumed to be the same as the downstream start elevation.
The Saint-Venant equations can be simplified by eliminating some terms of the dynamic equation, which results in benefits for the models such as simpler formulation, more accessible programming codes, and increased computational efficiency. We will explore more about the advantages of these simplifications, such as Kinematic Wave, Muskingum, and Muskingum-Cunge in the gradually variated flow sections.
The implicit solver uses a four-point implicit finite difference solver to find the numerical solutions for the hydrodynamic Saint-Venant equations. This method was developed by Bentley, based on the US National Weather Service FLDWAV model, to account for conditions in collection systems such as drop manholes and transition between gravity and pressure flow.
It simultaneously solves for both flow and hydraulic grade and uses the same equations for gravity and pressure portions of the system. It only solves dynamic flows (no steady-state). The implicit solver tends to be more stable with pumping situations and performs better than the explicit with short pipes and loops in the network.
As the name states, the explicit solver solves the full Saint-Venant equations using an explicit numerical method based on the EPA Stormwater Management Model version 5 (SWMM). Besides the St. Venant Dynamic Wave and Diffusive Wave (ignoring the Dynamic Wave inertial term) solutions, it can also route flows using further simplification. Examples of these simplifications are the kinematic wave solution and a uniform flow solution, which cannot account for backwater effects. The Explicit dynamic solver simultaneously solves for both flow and hydraulic grade and uses the same equations for gravity and pressure portions of the system.
The explicit solver can be applied to storm systems without a great deal of force mains or pressure sewers. It tends to be more stable with fast-changing areas, such as ponds or control structures where the flow or elevation changes quickly over multiple time steps. The explicit solver can also handle logic control for gravity structures.
Often, it is not required to solve the full St. Venant equations (Dynamic Solvers). There are numerous methods for hydrologic routing, including convex, kinematic wave (1D St.Venant-Equations Simplification), Muskingum, etc. All those methods can calculate the hydraulic properties once the flow is determined using Gradually Variated Flow equations.
The simplification comes with a cost, as the flow downstream will consider attenuation of dynamic effects. So, if there are substantial backups in the collection systems, the St. Venant solvers should be used. Another compromise is that flow splits must be modeled using a rating curve instead of the St. Venant solvers, which determine flow splits dynamically.
You have the advantage of a faster and more stable system if there are minimal backups, no flow splits (or you can accurately define rating curves), hydrologic routing, and St. Venant solutions yield similar results. Another advantage is that, unlike the St. Venant equations, the hydrologic routing methods and pressure pipe solutions can be applied to steady-state and dynamic situations.
The GVF – Convex can handle gravity and pressure pipes. It can also perform extended period simulations and steady-state simulations. It can base steady simulations using an extreme flow factor method that reduces peaking factors as the flow increases moving downstream.
The GVF-convex solver is adequate to design new collection systems because these systems are meant not to overflow, have backups, or present relevant inflow and infiltration rates. GVF-Convex is also recommended in systems with complicated pumping, systems with a good deal of pumping, or extensive use of pressure sewers. Or in systems that only need to use extended period simulation convex (EPS) routing instead of fully dynamic routing. It can also be used to perform a constraint-based constraint-based design or if you need to run a steady-state simulation, such as for a peak flow analysis with Extreme Flow methods.
However, dynamic solvers (Implicit and Explicit SWMM solvers) are recommended whenever an overflow condition arises because, in the GVF Convex solver, the HGL is reset to the rim for an overflow condition.
All solvers have their strengths and weaknesses, so there is no such a thing as a "best solver." Your role as an engineer is to select the solver that will best reflect the hydraulic behavior of your network under the conditions of interest.
Similarly, there is not a single "correct" way to solve the complex hydraulic conditions you may find in a system made of gravity and pressure pipes. Each problem has its characteristics and challenges that can make one solver (sometimes called an "engine") more advantageous and appropriate.
While there is no single rule of thumb, modeling a combined system usually requires dynamic solvers, while wastewater networks can use the GVF-Convex. However, the dynamic solvers are more suitable if the wastewater network presents complex and problematic issues with infiltration, manhole overflows, or flow splits. Additionally, as the GVF-Convex is better for complex pumping systems, you could apply it under certain circumstances for combined sanitary systems.
Are you interested in learning more about OpenFlows SewerGEMS? Contact one of our experts!
North America Contact – Mark Laurance, Product Sales Engineer, firstname.lastname@example.org, +18584106860
Latin America and Caribbean Contact – Julio Issao Kuwajima, Product Sales Engineer, email@example.com, +551128232656